華航潤滑油
殼牌潤滑油 美孚潤滑油 克魯勃潤滑油 福斯潤滑油 道達爾潤滑油 嘉實多潤滑油 加德士潤滑油 長城潤滑油 昆侖潤滑油 BP潤滑油
 
產品詳情
福斯RENOLIN CKC100,福斯CKC150,CKC220,CKC320工業合成齒輪油詳細說明?。g覽1302次)

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics
  • Good corrosion protection for steel and nonferrous metals
  • Good resistance to ageing
  • Good compatibility with sealing materials
  • Low foaming
  • Avoidance of frictional vibration by the use of surface-active additives
  • Good demulsification characteristics
  • Multipurpose applications

Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

RENOLIN CKC 100 150 220 320 460 680
Lubricating oil type
acc. to ISO 6743-6 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680
acc. to DIN 51 502 CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680
Characteristics Unit Test method
Colour 2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity
at 40 °C mm2/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm2/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index 102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505
上一產品: 美孚SHC Gear OH680齒輪油
下一產品: RENOLIN UNISYN CLP460,福斯合成極壓齒輪油ISO VG680
友情鏈接:百度搜索引擎 殼牌潤滑油官網 美孚潤滑油官網 
服務優勢
版權所有:深圳市華航潤滑科技有限公司 地址:深圳市南山區高新園中區科技中二路 網址:http://www.bttbuy.com 郵箱:2118555039@qq.com
聯系人:朱小姐(經理) 手機:15919763337 15919760805 電話:0755-21048979 傳真:0755-21019451 郵編:518000 粵ICP備18138428號
關鍵詞:殼牌(SHell)、美孚(Mobil). 克魯勃(klueber)、埃索(Esso)、嘉實多(Castrol)、BP潤滑油、道達爾潤滑油(TOTAL)、福斯潤滑油(FUCHS),加德士
免费少妇a级毛片_天天情夜夜爱视频_久久 精品 综合 涩_欧美一级美女在线